• Industry News
  • 490

Custom Aluminum Gate Ordering FAQ: What to Prepare

What to prepare before ordering a custom aluminum gate: opening measurements, gate type, control system, accessories, logo engraving, MOQ 1 set, 30-day lead time and after-sales support.

Custom Aluminum Gate Ordering FAQ: What to Prepare

Ordering a custom aluminum gate is a specification task before it becomes a purchase. The measurements, opening mode, control system, accessory list and branding decisions a buyer settles at the quotation stage decide whether the finished gate fits the entrance and whether installation proceeds without rework.

Junsu outdoor is the brand of Henan Junsu Technology Co., Ltd., a manufacturer of outdoor pergolas, aluminum fences and automatic driveway gates established in 2001, with a 30,000 m² production base serving the EU, USA, France, Germany, Canada, Australia and other export markets. Gates are built to project dimensions under OEM and ODM arrangements, with a minimum order quantity of one set and a stated lead time of 30 days. This FAQ sets out what to prepare, in what order, and what the after-sales arrangement covers once the gate leaves the factory.

Modern aluminum gate installed at a luxury villa entrance
Modern aluminum gate at a luxury villa entrance — the finished result of a specification that started with opening width, gate type and control choice.

What a complete custom aluminum gate order actually contains

An order is complete when it defines seven inputs: opening geometry, gate type and opening mode, intelligent control system, accessories and hardware, surface finish and engraved logo, quantity and delivery requirement, and the site conditions the gate will be installed into. If any one of these is missing, the drawing stage either stalls or proceeds on an assumption that later has to be corrected.

The reason is structural rather than administrative. A gate is manufactured to a specific clear opening, and the opening mode determines how the leaves move, where the operator sits and how much space beside or behind the entrance must stay clear. Changing the opening mode after drawings are released affects the frame, the hinge or track layout, the motor selection and the foundation interface at the same time.

Junsu outdoor lists gate opening mode, intelligent control system, accessories configuration and embedded logo engraving among the customization items available for fences and gates, alongside overall dimensions, profile thickness, surface colour, pattern, bar spacing and hardware style. Each item is a decision the buyer makes, not a factory default that can be adjusted silently later.

Measurements and site information to send with the inquiry

For an accurate gate design and quotation, the buyer should provide the clear opening width and height, the preferred gate type, the quantity and clear site photos. For an automatic gate, the ground condition, the posts or walls the gate will hang from or run beside, the available side space and the power supply location should be added.

Clear opening width and height are the basic measurements because they define the passage the gate must leave free. Site photos are strongly recommended rather than optional: they show the relationship between the driveway, the boundary wall, the slope and any fixed obstruction, which a dimension list alone cannot convey. Ground information matters most for motorized and sliding installations, where the track or operator base has to sit on a stable, correctly levelled surface.

Information itemWhat it determinesNote
Clear opening width and heightGate leaf size, frame proportions, overall structureBasic requirement for any quotation
Preferred gate typeWhether the design proceeds as swing, sliding or bi-foldSliding, swing and bi-fold gates can all be customized
QuantityProduction planning and packingMinimum order quantity is one set
Site photosInstallation conditions and available spaceStrongly recommended
Ground conditionTrack or operator base, levelling approachEspecially relevant to motorized and sliding gates
Posts or wallsHinge fixing, anchoring, gate travelNeeded to evaluate the structure before production
Available side spaceWhether a sliding leaf can park clear of the drivewayDecisive for sliding and bi-fold options
Power supply locationMotor installation and cable routingRequired for automatic gates
Opening directionLeaf swing or travel direction, drawingsConfirmed before final production drawings

Accurate site information allows the gate structure, opening direction and motor installation to be evaluated before production rather than during it. Drawings can then be prepared and confirmed against the project dimensions, and production begins only after that confirmation.

Selecting the opening mode: swing, sliding or bi-fold

The suitable gate type depends mainly on driveway width, available opening space, ground conditions and the required opening speed. There is no universally preferable mode; each one resolves a different space problem.

Swing gates

Swing gates suit entrances where enough space exists for the leaves to open inward or outward. The constraint is the swept arc: the area the leaf covers while moving has to remain clear of parked vehicles, planting and fixed structures.

Sliding gates

Sliding gates are appropriate when there is enough lateral space beside the entrance for the leaf to travel and park. They leave the driveway itself unobstructed during opening, which matters where a vehicle waits close to the gate line. The product range covers sliding gate and cantilever sliding gate configurations.

Bi-fold gates

Bi-fold gates are particularly useful where the driveway has limited opening depth and a more compact opening solution is required. The leaves fold as they move, so the depth needed during operation is shorter than a conventional swing arc.

Modern aluminum swing gate at a residential driveway entrance
A modern aluminum swing gate. Swing designs require a clear swept arc on the opening side of the entrance.

Site dimensions and clear photographs let the manufacturer evaluate the installation space and recommend a suitable configuration. That recommendation is an evaluation against the supplied conditions, not a guarantee that any mode will fit an unmeasured entrance.

Configuring the intelligent control system

Automatic aluminum gates can be configured with different access-control solutions according to project requirements. Available options may include remote control, fingerprint recognition, password keypad, card access and mobile APP control, and the suitable motor and control system are selected according to gate type, gate size, weight and installation conditions.

The selection logic runs in one direction: the gate defines the motor, not the reverse. A leaf that is wide, heavily built or fitted with decorative infill presents a different load profile from a lighter design, and the operator has to be matched to that load and to the way the leaf moves. This is why gate dimensions and weight information belong in the same inquiry as the control preference.

Accessories in the same family include the intelligent access lock, rain and wind sensors, LED ambient lighting and hidden adjustable hinges. These are supporting equipment for the entrance system, configured together with the gate rather than added as an afterthought.

Single aluminum gate fitted with a smart access lock
A single aluminum gate with an integrated smart lock. Lock, sensor and motor choices are confirmed together with the gate specification.

For outdoor installation, the wider system is specified for high humidity, dust and a wide temperature range stated as −35 °C to 65 °C, with IP66 waterproof and dustproof protection. Buyers should still confirm the power supply location, drainage conditions and cable routing at the site, because correct installation is part of what makes those ratings meaningful in service.

Accessories, surface details and embedded logo engraving

Accessories configuration and embedded logo engraving are both listed customization items for gates and fences, alongside surface colour, decorative pattern and hardware style. That means a gate order can carry a visual identity as well as a functional specification.

Typical decisions at this stage cover the lock and hardware style, the anti-collision structure, the bottom gap height and hidden installation fittings, together with the hollow carving pattern and bar spacing where the gate face uses one. Each of these changes either the appearance, the installation detail or both, so they belong in the drawing package rather than in a post-order message.

Logo engraving is a production step in its own right. Engraved work depends on artwork being supplied in a usable form and approved before machining, because the mark is cut into the material rather than applied on top of it. Buyers preparing a private-label programme should therefore treat the logo file as part of the order documentation, not as a later add-on.

CNC engraving machine used for cutting logo marks into aluminum components
CNC engraving equipment used for embedded logo work on aluminum components. Artwork is approved before machining begins.

MOQ, lead time and OEM/ODM scope

The minimum order quantity for a custom aluminum gate is one set, and the stated lead time is 30 days. Monthly production capacity is approximately 3,000 sets, supported by a 30,000 m² manufacturing base, a 120-person team and an annual output of about 36,000 sets.

An MOQ of one set changes who this process is open to. A single villa owner specifying an entrance gate and a distributor preparing a repeat programme work through the same drawing confirmation, with the difference sitting in quantity, packing and labelling rather than in whether customization is available at all.

OEM and ODM services cover the customization range described above — dimensions, profile thickness, surface coating colour, decorative pattern, opening mode, control system, accessories, engraved logo, hardware style and packaging. Custom work can be developed from CAD drawings, architectural plans, sketches, photos, dimensions and samples, and the manufacturer can supply technical drawings, design optimization, installation drawings, customized logos, private labels and packaging as part of the same order.

Practical note on timing. The 30-day lead time applies to production. Drawing preparation and confirmation sit ahead of it, so the elapsed time from first inquiry to shipment depends on how quickly site data, gate type, control selection and artwork are settled and approved.

The ordering process, step by step

  1. Send dimensions and site photos. Clear opening width and height, gate type preference, quantity, site photographs and, for automatic gates, ground condition, posts or walls, side space and power supply location.
  2. Confirm the opening mode. Swing, sliding or bi-fold, evaluated against the actual entrance space rather than against a preference alone.
  3. Select the control system. Remote control, fingerprint, keypad, card access or APP control, with the motor matched to gate type, size, weight and installation conditions.
  4. Define accessories and branding. Lock and hardware style, sensors, lighting, hidden fittings, surface colour, pattern and any embedded logo engraving, with artwork supplied for approval.
  5. Approve the production drawings. Drawings are prepared according to project dimensions and requirements, and opening direction is confirmed before final drawings are released.
  6. Confirm the quotation and order. Quantity, configuration and packing are fixed at this point; MOQ is one set.
  7. Production and inspection. Quality control runs from raw material inspection through manufacturing and assembly to functional checks. Inspection methods include 100% pre-shipment test, raw material composition test, wall thickness measurement, surface coating adhesion test, load-bearing wind resistance test, waterproof performance test and motor continuous operation aging test.
  8. Packing and shipment. Packaging inspection is part of the pre-delivery sequence, together with customized private labels where ordered.
  9. Installation guidance and commissioning. Remote installation guidance and remote system debugging are provided, followed by product maintenance guidance for the operating period.
Aluminum gate production workshop with gate frames in assembly
Aluminum gate production workshop. Frames are assembled to the approved project drawings before functional checks and pre-shipment inspection.

Matching the gate to the project scenario

The same gate specification logic applies across very different sites, but the emphasis shifts. Documented applications for this product family cover villa courtyard decoration and protection, residential community supporting facilities, park and scenic landscape engineering, hotel and resort outdoor matching, municipal public infrastructure, factory and campus safety isolation, commercial landscape renovation, and outdoor leisure shading and enclosure.

For a villa courtyard, the governing questions are usually privacy and the relationship between the gate and the boundary fence, which is where a coordinated colour and profile system matters. For a residential community or municipal site, access control and the number of daily opening cycles weigh more heavily, so the control system and motor duty come forward. For a factory or campus boundary, safety isolation and structural stability dominate, and the gate is evaluated as part of a perimeter rather than as a standalone entrance.

Standard material for aluminum products is 6063-T5 aluminum alloy, with anti-corrosion properties and a fade-resistant surface coating suited to long-term outdoor exposure. For buyers assembling a coordinated site, pergolas, fences and gates can be specified from a single manufacturer with unified profiles, colour codes and craft — which is the practical answer to the common concern that separately purchased outdoor elements end up with mismatched colours.

Gate type comparison at a glance

Gate typeSpace condition it needsWhere it fits bestCustomization
Swing gateEnough inward or outward space for the leaves to openEntrances with a clear swept arc and no obstruction behind the gate lineCustomized to project dimensions
Sliding gateSufficient lateral space beside the entrance for the leaf to parkDriveways where the opening must stay clear while the gate movesCustomized to project dimensions
Bi-fold gateLimited opening depth; compact folding movementSpace-limited driveways and tight entrance geometryCustomized to project dimensions

The comparison is a space test, not a quality ranking. A mode that suits one driveway can be the wrong choice on the next, and the recommendation step exists precisely because the answer depends on the measured site.

After-sales support after the gate is delivered

After-sales support for this product covers long-term warranty service, free technical consultation, remote installation guidance, remote system debugging, spare parts supply support, after-sales fault response service, product maintenance guidance and lifelong technical support.

Read together, these items describe a support model built around the installation and operating period rather than around the shipment date. Remote installation guidance and remote system debugging address the stage where most issues appear — commissioning a motorized gate on a site whose ground, power and alignment conditions are only fully known on the day. Spare parts supply and fault response matter later, when a component needs replacement and the gate must return to service.

Maintenance guidance is the part buyers most often overlook at the quotation stage. Aluminum is specified for corrosion resistance and low maintenance, and the operating routine is light: regular cleaning rather than rust removal, repainting or seasonal upkeep. That does not make maintenance unnecessary — it changes what maintenance consists of, which is worth knowing before the gate is installed rather than after.

Free technical consultation and lifelong technical support are the two items that extend beyond a single transaction. For a distributor building a repeat programme, or a contractor handing a completed entrance over to an end user, having a technical contact who can answer questions about a gate supplied years earlier is a different kind of assurance from a warranty document alone.

Case evidence from delivered projects

Delivered project evidence for this product family includes 600 sets supplied to the United States, with implementation also recorded in European markets including Belgium, Switzerland, France, the United Kingdom and Italy. Documented installation images cover project sites in Belgium, the United Kingdom, Italy, Switzerland, Singapore, the United States, Australia, Spain and the Philippines.

The case addressed insufficient outdoor privacy and site safety isolation in villa courtyards and public facilities, and the recorded highlights are welding technology, one-stop complete supporting, low maintenance and climate adaptability. The project satisfied different regional climate adaptation requirements across the 10 countries of delivery, and the customer relationship behind the record spans 15 years.

What this evidence does and does not establish is worth stating plainly. It shows that the configuration range — including wall-mounted, free-standing, multi-zone and special cut and angle options for the pergola line, and swing, sliding and bi-fold options for gates — has been delivered across several climate zones. It is not a performance guarantee for a specific future site, because site conditions, installation quality and operating patterns differ.

Frequently asked questions

What information do I need to provide before ordering a custom aluminum gate?

For an accurate gate design and quotation, provide the clear opening width and height, preferred gate type, quantity and site photos. For automatic gates, information about the ground condition, posts or walls, available side space and power supply location is also helpful. Accurate site information allows the gate structure, opening direction and motor installation to be evaluated before production.

Should I choose a sliding gate, swing gate or bi-fold gate for my driveway?

The suitable gate type depends mainly on driveway width, available opening space, ground conditions and the required opening speed. Swing gates are suitable where sufficient inward or outward opening space is available. Sliding gates are ideal when there is enough lateral space beside the entrance. Bi-fold gates are particularly useful where the driveway has limited opening depth and a more compact opening solution is required. Site dimensions and photos can be provided so a suitable configuration can be recommended.

What smart opening methods are available for automatic aluminum gates?

Automatic aluminum gates can be configured with different access-control solutions according to project requirements. Available options may include remote control, fingerprint recognition, password keypad, card access and mobile APP control. The suitable motor and control system are selected according to gate type, gate size, weight and installation conditions.

Can the gate carry an embedded logo or a custom surface finish?

Yes. Embedded logo engraving, surface coating colour, decorative pattern and hardware style are listed customization items for gates and fences, together with overall dimensions, profile thickness, bar spacing and bottom gap height. Engraved work requires artwork to be supplied and approved before machining, because the mark is cut into the material rather than applied on the surface.

What is the minimum order quantity and the lead time?

The minimum order quantity for a custom aluminum gate is one set, and the stated lead time is 30 days. Monthly production capacity is approximately 3,000 sets. Drawing preparation and confirmation take place ahead of the production lead time, so total elapsed time depends on how quickly site data, gate type, control selection and artwork are approved.

Do you provide OEM and ODM services?

Yes. OEM and ODM services cover dimensions, profile thickness, surface coating colour, decorative pattern, opening mode, intelligent control system, accessories configuration, embedded logo engraving and hardware style. Custom work can be developed from CAD drawings, architectural plans, sketches, photos, dimensions and samples, with technical drawings, design optimization, installation drawings, customized logos, private labels and packaging supplied as part of the order.

What after-sales support is included after delivery?

After-sales support includes long-term warranty service, free technical consultation, remote installation guidance, remote system debugging, spare parts supply support, after-sales fault response service, product maintenance guidance and lifelong technical support. Quality control before delivery includes 100% pre-shipment test, raw material composition test, wall thickness measurement, surface coating adhesion test, load-bearing wind resistance test, waterproof performance test and motor continuous operation aging test.

Can I order a matching pergola or fence together with the gate?

Yes. Pergolas and aluminum fence systems can be specified from the same manufacturer as the gate, with unified profiles, colour codes and craft, which avoids the mismatch that can occur when outdoor elements are purchased separately. Pergola configurations include custom dimensions up to 22'10" x 16' for a single zone, wall-mounted, free-standing, multi-zone and special cut and angle options, and models 147, 163, 175 and 220. A coordinated order also consolidates drawing confirmation, inspection and shipment.

How do I start a quotation?

Send the clear opening width and height, preferred gate type, quantity, site photos and, for an automatic gate, ground condition, posts or walls, side space and power supply location. On that basis the gate structure, opening direction and motor installation can be evaluated, drawings prepared and a quotation issued. A sample discussion or a catalogue review can precede a full specification if the gate type is still open.

Conclusion

The preparation stage carries most of the risk in a custom aluminum gate order. Opening width and height, gate type, control system, accessories, branding and site conditions are the six areas that determine whether drawings can be released and whether installation runs to plan; the commercial terms — minimum order quantity of one set and a 30-day lead time — are fixed and known in advance.

For buyers comparing outdoor living solutions, the useful question is not whether a gate can be customized, since swing, sliding and bi-fold gates can all be built to project dimensions. It is whether the supplier documents the specification, confirms drawings before production, inspects before shipment and stays available for installation, spare parts and technical questions afterwards.

Next step

Send your clear opening dimensions, opening-mode preference, site photos and, for automatic gates, the power supply and ground conditions. A drawing review and quotation can follow, and a sample or catalogue review is available if the configuration is still being compared.

Contact: JunSu@junsutech.com | WhatsApp/Tel: +86 135-2556-8065 | www.junsu-outdoor.com

Download the full product catalogue here: Junsu Products Catalog (PDF)

Aluminum swing driveway gate with an integrated wicket door
An aluminum swing driveway gate with an integrated pedestrian wicket door — a common villa configuration where vehicle and foot access share one entrance opening.